Whether you need power run to a new build, extension, granny flat, shed or studio, a dedicated circuit for an appliance, or new power points and circuits, our licensed electricians connect it safely and to the AS/NZS 3000 standard. We run properly protected supplies and circuits, install weatherproof RCD-protected connections outdoors, and check your switchboard can handle the new load, upgrading it if it is full or outdated. You get power where you need it, done compliantly with the right protection. We connect power across Brisbane, Perth and Adelaide, with same-day service where we can and an upfront fixed price.
We are local, licensed electricians who do this work every day, so we get it right the first time, with no mess and no shortcuts on safety.
You get safe, tidy, guaranteed workmanship every time, and honest advice on what your home actually needs.
Whenever you need power supplied somewhere it is not, a new build, an extension, a granny flat, a shed, a studio, or for a new appliance or circuit, it is licensed electrical work that must be done safely and to the wiring standard by a licensed electrician. We connect power to new and existing structures, run new circuits and points, install dedicated circuits for appliances, and ensure your switchboard can handle the additional load. A proper connection means the right cable, the correct protection, and compliance with AS/NZS 3000, so your new power supply is safe and reliable. We connect power across Brisbane, Perth and Adelaide, with an upfront fixed price and workmanship we stand behind.
Outbuildings like sheds, granny flats, studios, workshops and home offices usually need their own power supply, and running it safely from the main switchboard is a job for a licensed electrician. We install a properly sized, protected sub-supply to the structure, with its own circuits, power points, lighting and safety switches as needed. Whether it is a few points and lights in a garden shed, or a full supply for a granny flat or studio that will be lived in or worked in, we size the supply to the load, run it safely (including underground where needed), and make it compliant. You get reliable, safe power in your outbuilding, properly connected rather than run off dangerous extension leads.
Many major appliances need their own dedicated circuit to run safely, because they draw too much power to share a general circuit. These include electric ovens and cooktops, ducted and some split air conditioners, instantaneous electric hot water, pool and spa equipment, and EV chargers. Running a high-draw appliance on an inadequate or shared circuit causes nuisance tripping and overheating and is a fire risk. We install dedicated circuits of the correct rating for your appliances, connecting them safely from the switchboard and ensuring the board can handle the load. If you are adding a major appliance, we make sure it has the proper supply it needs to run reliably and safely.
If you are short of power points and relying on power boards and extension leads, which is both inconvenient and a fire risk, we can add new power points and circuits wherever you need them, in the kitchen, home office, living areas, bedrooms, garage or outdoors. We run the new wiring neatly, connect it to a suitable circuit, and make sure the circuit and switchboard are not overloaded. Where the existing circuits are already heavily loaded, we can add a new circuit to spread the load. The result is power where you need it, safely, without the tangle of double adapters and leads. We can add a single point or wire power throughout a renovation.
Before connecting new load, whether an outbuilding supply, a dedicated appliance circuit, or new circuits, we check that your switchboard and supply can safely handle it. Adding significant load to a board that is already full or outdated can cause overloading, nuisance tripping, or unsafe conditions. We assess the switchboard’s capacity and condition, and if it is full, old (with ceramic fuses and no safety switches), or not up to the new load, we can upgrade it as part of the job. This ensures your new power connection is safe and reliable, rather than overloading a board that was never designed for the extra demand. See our switchboard service.
Connecting power outdoors or to a detached structure often involves running cable outside or underground, which must be done correctly to be safe and compliant, outdoor wiring must be weatherproof and the circuits RCD-protected, and underground cable must be the right type, at the correct depth, and protected. We run outdoor and underground supplies properly, to sheds, granny flats, outdoor areas, pools and more, with weatherproof connections and safety switch protection. Done correctly, these connections are safe and reliable for years; done poorly, they are a serious hazard. We have the expertise to run outdoor and underground power safely and to standard, so your detached structure or outdoor area has proper, safe power.
Electric vehicle chargers need a dedicated circuit of the correct rating and often a switchboard with adequate capacity and safety switches, so connecting one is licensed electrical work. We install the dedicated circuit and connection for home EV chargers, check and upgrade your switchboard if needed, and ensure everything is safe and compliant. As more households move to EVs, a proper charging connection is increasingly common, and getting it done correctly is important for safe, reliable charging. If you are installing an EV charger, we can connect the power it needs, including any switchboard upgrade, so you can charge your vehicle safely at home. We will advise on the right circuit for your charger.
A renovation or extension is a common time to need new power connections, additional circuits and points for new rooms, a new kitchen or bathroom, or added living space. Doing the electrical work at the right stage, while walls are open, is efficient and avoids rework. We can connect power throughout a renovation or extension, running circuits, installing points and lighting, connecting appliances, and upgrading the switchboard to handle the increased load, all coordinated with the build. Planning the electrical work early ensures your renovated or extended space has enough power, in the right places, done compliantly. If you are renovating or extending, talk to us early so the power connections are ready when you need them.
Every power connection we make is done to the AS/NZS 3000 wiring standard, with the correct cable sizing for the load, appropriate circuit protection, and safety switches where required. This is not just about making the power work, it is about making it safe: an undersized cable, inadequate protection, or a poor connection is a fire and shock risk. Connecting power is licensed work for exactly this reason. We ensure your new circuits, supplies and connections are correctly sized, protected and compliant, and we test them before we finish. You get power that is not only convenient but genuinely safe, and where required we provide a certificate of compliance for the work.
Sometimes you need power safely disconnected rather than connected, for demolition, removing an appliance or structure, or decommissioning a supply. Disconnecting power safely is also licensed electrical work, as it must be done so that no live wiring is left exposed or hazardous. We safely disconnect and make safe circuits, appliances and supplies, isolating and terminating the wiring correctly. Whether you are demolishing, removing a shed or pool, or decommissioning part of your electrical installation, we handle the disconnection safely and properly. If you need power disconnected as well as connected, for example reworking a supply, we can manage both sides of the job safely and compliantly.
The cost of connecting power depends on the distance the supply or circuit needs to run, the load and cable size required, whether the work is indoor, outdoor or underground, and whether your switchboard needs upgrading to handle the new load. A nearby additional circuit is a smaller job than running an underground supply to a detached granny flat. We assess exactly what is needed, including any switchboard work, and give you an upfront fixed price before we start, so you know the cost. We will explain what the connection involves and why, so there are no surprises, and the work is done safely and to standard.
Whether you need power connected for an appliance, a new circuit or point, a shed or granny flat, or an EV charger, we offer fast service and same-day appointments where we can across Brisbane, Perth and Adelaide. Our electrician will assess what you need, check your switchboard capacity, run and connect the supply safely, and test it, with an upfront price. Our phones are answered around the clock. We will make sure your new power connection is safe, compliant and reliable, done properly rather than as a risky shortcut, so you have power where you need it without compromising safety.
Connecting power, running circuits, supplying outbuildings, and connecting appliances is licensed electrical work, because getting the cable size, protection or connection wrong is a fire and shock risk, so it is never a DIY job. Our licensed electricians connect power safely to the AS/NZS 3000 standard, size circuits and supplies correctly, install weatherproof RCD-protected outdoor and underground connections, upgrade switchboards where needed, and provide compliance certification. You get safe, reliable power where you need it, honest advice, upfront fixed pricing, and guaranteed workmanship. For power connections of all kinds, we cover Brisbane, Perth and Adelaide.
Yes. We run a properly protected supply to sheds, granny flats, studios and outbuildings, with the right circuits, points and safety switches.
Yes. We install dedicated circuits and connections for appliances like ovens, air conditioners, hot water and EV chargers that need their own supply.
Yes. We add new power points and circuits wherever you need power, checking the switchboard can handle the additional load.
We check your switchboard capacity before connecting new load, and if it is full or outdated, we can upgrade it so the new supply is safe.
Yes. Connecting power, running circuits and wiring is licensed electrical work and must be done by a licensed electrician.
It depends on the distance, the load, and any switchboard work needed. We give you an upfront fixed price before we start.
Yes. Outdoor and sub-supply connections are installed weatherproof and RCD-protected to the standard.
Yes, we connect power across Brisbane, Perth and Adelaide, with same-day service where we can.
We can all agree that a leaking drain under basin or sink is one of the most common household plumbing issues. Kitchen and bathroom sinks, in particular, are the two most frequented areas in any home.
Are blocked drains or damaged pipes disrupting your plumbing network? Get in touch with us at Same Day Trades for effective solutions at the earliest. When it comes to pipe repairs, you don’t want to cheap out and get it done by a local handyman. Chances are they don’t have the required tools or expertise to carry out fool-proof repairs.
If you notice sudden leaks or rust-riddled water, it may be time to replace taps immediately. Fortunately, you have come to the right place. Contact Same Day Trades for assistance with faulty or damaged taps in your home. There is no point in waiting for the damage to worsen.
Pipes in the plumbing system of some homes may be blocked frequently due to various reasons. Sometimes roots may enter the pipes through the cracks in old plumbing systems.
If you find constant puddles of water or condensation in a portion of the toilet, it means you’re dealing with a leaking toilet! There are many other signs which indicate that your toilet is leaking, such as brown stains on the backside of the toilet bowl or water dripping into the bowl.
If your tap is faulty or looks outdated, you will want to replace it. And you’ve come to the right place for it! To install taps anywhere in your home, the plumbing services of a reputed company are required. At Same Day Trades, we offer our premium-quality installation, repair, and maintenance services for all your needs, in any setting.
There can be multiple causes of a clogged drain, and it can prevent sinks and toilets from working. And snake down drains serve as excellent solutions to the problem. But this can be a messy task, and one wrong move can also break the drain pipe. Hence, it is best to let professionals handle it.
Downpipes carry rainwater from gutters and let it reach the soil to prevent it from splashing or dripping down the roof. This way, the extra pressure is alleviated from the roof.
With hundreds of 5 star reviews, we’re the local tradesmen you can trust.
We make sure you know exactly what you are paying for ahead of time.
You’re in safe hands as our tradesmen are fully licensed and insured to do your job.
Our work will be free of defects in workmanship and workmanship will be warranted for life.
We offer convenient booking times that can be worked around your schedule.
We take calls 24 hours a day and 365 days a year so that we’re always available to be of service.
With hundreds of 5 star reviews, we’re the local tradesmen you can trust.
We make sure you know exactly what you are paying for ahead of time.
You’re in safe hands as our tradesmen are fully licensed and insured to do your job.
Our work will be free of defects in workmanship and workmanship will be warranted for life.
We offer convenient booking times that can be worked around your schedule.
We take calls 24 hours a day and 365 days a year so that we’re always available to be of service.
